VIETNAM KITCHEN CABINET COUNTERTOP REQUIRED DETAILS – Bath & Kitchen Cabinets Made In Vietnam https://www.bathkitchencabinet.com Vietnamese Bath & Kitchen Cabinets Manufacturer Sun, 25 Feb 2024 01:34:32 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 230962572 VIETNAM KITCHEN CABINET COUNTERTOP REQUIRED DETAILS https://www.bathkitchencabinet.com/vietnam-kitchen-cabinet-countertop-required-details/ https://www.bathkitchencabinet.com/vietnam-kitchen-cabinet-countertop-required-details/#respond Sun, 25 Feb 2024 01:34:32 +0000 http://www.bathkitchencabinet.com/?p=70 COUNTERTOP REQUIRED DETAILS:

Plastic Laminate (Kitchen only):

  • Suggested Laminate Manufacturers: Wilsonart or Formica.
  • NEMA LD 3 compliant, HGP Grade, and minimum 1.0mm thickness.
  • Countertop Construction:
    • Post form (continuous, no visible joints).
    • Front Edge – Continuous, Double Round Over, 1 3/8″ high (See Section Below).
    • Backsplash – Continuous one piece raises up wall with 1 1/8″ return to wall (See Section Below).
    • Side splash – square edged loose, installed between wall and counter, height to match back splash height.
    • Substrate: Comply with ASTM D 1037.
      • At Sink: Exterior grade plywood or phenolic resin.
      • Particleboard: Compliance with ANSI A208.1 (Grade M-2 exterior
        glue), 45-lb density and minimum 3/4” thick.
      • MDF: Compliance with ANSI A208.2 and minimum 3/4″ thick.
    • Provide BK-20 Backer Sheet if unsupported countertop area.

GRAPHIC OF POST FORM COUNTERTOP:

Solid Surface/ Vanity Top with Integral Sink (Bathrooms only):

  • Suggested Manufacturers: Swanstone.
  • Coordinate size with cabinetry manufacturer.
  • Coordinate product with faucet. No open holes or plugs to be used.
  • 2 gallon bowl capacity.
]]> https://www.bathkitchencabinet.com/vietnam-kitchen-cabinet-countertop-required-details/feed/ 0 70