VIETNAM KITCHEN CABINET COUNTERTOP REQUIRED DETAILS

COUNTERTOP REQUIRED DETAILS:

Plastic Laminate (Kitchen only):

• Suggested Laminate Manufacturers: Wilsonart or Formica.
• NEMA LD 3 compliant, HGP Grade, and minimum 1.0mm thickness.
• Countertop Construction:
  • Post form (continuous, no visible joints).
  • Front Edge – Continuous, Double Round Over, 1 3/8″ high (See Section Below).
  • Backsplash – Continuous one piece raises up wall with 1 1/8″ return to wall (See Section Below).
  • Side splash – square edged loose, installed between wall and counter, height to match back splash height.
  • Substrate: Comply with ASTM D 1037.
    • At Sink: Exterior grade plywood or phenolic resin.
    • Particleboard: Compliance with ANSI A208.1 (Grade M-2 exterior
      glue), 45-lb density and minimum 3/4” thick.
    • MDF: Compliance with ANSI A208.2 and minimum 3/4″ thick.
  • Provide BK-20 Backer Sheet if unsupported countertop area.

GRAPHIC OF POST FORM COUNTERTOP:

Solid Surface/ Vanity Top with Integral Sink (Bathrooms only):

• Suggested Manufacturers: Swanstone.
• Coordinate size with cabinetry manufacturer.
• Coordinate product with faucet. No open holes or plugs to be used.
• 2 gallon bowl capacity.