VIETNAM KITCHEN CABINET BOX CONSTRUCTION REQUIRED DETAILS

BOX CONSTRUCTION REQUIRED DETAILS:

A) FRONT FRAME: 3/4” solid hardwood or thermo-foil vinyl wrapped solid finger jointed lumber or LVL linear veneer lumber Bore and dowel/pocket screw construction frame joinery reinforced with glue/nails. Stiles 1 1/2” wide. Mulls 3” wide. Rails 1 3/4” wide. Stile and top and bottom rails dadoed to receive ends, tops, and bottoms.

B) END PANELS: Standard: Nominal 1/2” thick multi-ply birch veneer plywood dadoed to receive tops and bottoms, with wood grained or laminate on interior/exterior surfaces. All end panels are inserted into dado in face frame and recessed 3/16”.

C) TOP/BOTTOM PANELS: 1/2” thick multi-ply hardwood plywood. Tops and bottoms are set into grooved end panels and front rails glued and stapled. Bottoms are supported by 1/2” thick wood base composite panel.

D) HANGING RAILS: Wall cabinets have 1/2” thick x 2 7/8” multi-ply plywood hanging rail, running full cabinet width at top and bottom. Base cabinets have 1/2” thick x 2 7/8” wood based composite panel hanging rail running full cabinet width at top. Hanging rails are captured between end panels recessed behind.

E) BACK PANEL: 1/8” thick hardwood plywood Securely glued/stapled to end panels and hang rails. Back panels are fully captured on wall cabinets.

F) SHELVES: 5/8” thick multi-ply hardwood plywood, with hardwood veneer banded front edge. Shelves are adjustable in all standard wall and base cabinets.

G) TOE KICK: 4” high and recessed 3 3/8”.1/2” thick unfinished wood based composite panel captured between end panels. Finish should be covered with infill panel to match finish.

H) BASE CORNER BRACES: High impact, injection molded plastic.

I) DRAWERS: Nominal 1/2” thick multi-ply hardwood front, back, and sides. Drawer bottoms are nominal 1/4” thick multi-ply hardwood inserted into dado in front back and sides. All drawer parts glued and stapled together.

J) DRAWER GUIDES: High-quality epoxy coated steel, Cushion-Tec, side mounted guides, self adjusting in mounting brackets. Built-in stop, self-closing and stay-closed features with a 100 lb. rated load capacity.