VIETNAM Dovetail Drawer Box- 5/8″ SOLID Prefinished Rubberwood (Finger-Joint, raw/unsanded dovetailed joints)

Quantity and Sizes
quantity*:

WIDTH*:
Inches (e.g. 16 1/16, 17 1/4) 1/16″ increments
Click to view more HEIGHT

HEIGHT*:

please select

DEPTH*:

please select

Click to view more size verification

size verification*:

please select- stay within the margins to prevent delays

Assembly Options
Click to view more assembly

assembly*:

not assembled (customer will assemble on site)

Description Assembly Instructions
Dovetail drawer box made from 5/8″ thick pre-finished Rubberwood (solid wood, finger-jointed) hardwood with raw dovetailed joints (apply finish to dovetailed joints on site, if desired, as this is optional) with a 1/4″ thick Birch plywood drawer box bottom.

Drawer Box Only (no drawer guides)

This product is shipped UN-ASSEMBLED (5 pieces). Assembly of this item is very easy and can be done with only a rubber mallet and some wood glue.
Incredibly durable 5/8″ thick clear finished solid finger-jointed rubberwood sides (dovetailed joints are raw/unfinished wood, only the top edge, face, and back of drawer sides will have a clear finish applied)
Super strong 1/4″ (approximate) thick clear finished BIRCH veneered plywood bottom (grain direction may run either left to right or front to back)
Dovetailed joint construction (dovetailed joints are raw wood, apply an optional finish of your choosing on site as needed, most will coat with a light oil/wax)
THIS PRODUCT IS SHIPPED “NOT ASSEMBLED”
*Unfinished dovetailed joints (no paint or stain will be applied to dovetailed joints)
1/2″ bottom recess works with Blum under mounted drawer slides (notching and some modification required)
Made in USA with global materials

Assembly Notes:
Please be aware that when the box is ordered fully assembled, the joints will be very tight in order to create a seamless box. Since the joints are so snug, you may need to use a rubber mallet or a light hammer to tap the pieces together. Assembly method is the same as shown in our default assembly video below, with the exception of the need to sand the joints (i.e. do not sand, you will scuff the finish on the drawer box sides!).
CLICK HERE FOR STEP BY STEP ASSEMBLY INSTRUCTIONS